Android motionevent multi touch

Android-.jpg

Most Android based devices, and the Kindle Fire is certainly no exception, use a touch screen as the primary interface between user and device. The previous chapter provided an initial introduction to the mechanism by which a touch on the screen translates into an action within a running Android application. There is, however, much more to touch event handling than responding to a single finger tap on a view object. Most Android devices can, for example, detect more than one touch at a time. Nor are touches limited to single point on the device display. Touches can, of course, be dynamic as the user slides one or more points of contact across the surface of the screen.

Touches can also be interpreted by an application as a gesture. Consider, for example, that a horizontal swipe is typically used to turn the page of an eBook, or how a pinching motion can be used to zoom in and out of an image displayed on the screen. The objective of this chapter is to highlight the handling of touches that involve motion and to also explore the concept of intercepting multiple concurrent touches. The topic of identifying distinct gestures will be covered in the next chapter.

Android 2 Android motionevent multi touch

1 Intercepting Touch Events
2 The MotionEvent Object
3 Understanding Touch Actions
4 Handling Multiple Touches
5 An Example Multi-Touch Application
6 Designing the Activity User Interface
7 Implementing the Touch Event Listener
8 Running the Example Application
9 Summary

Intercepting Touch Events

Touch events can be intercepted by a view object through the registration of an onTouchListener event listener and the implementation of the corresponding onTouch() callback method. The following code, for example, will ensure that any touches on a RelativeLayout view instance named myLayout will result in a call to the onTouch() method:

myLayout.setOnTouchListener(
new RelativeLayout.OnTouchListener() {
public boolean onTouch(View v, MotionEvent m) {
// Perform tasks here
return true;
}
}
);

As indicated in the code example, the onTouch() callback is required to return a Boolean value indicating to the Android runtime system whether or not the event should be passed on to other event listeners registered on the same view or discarded. The method is passed both a reference to the view on which the event was triggered and an object of type MotionEvent.
The MotionEvent Object

The MotionEvent object passed through to the onTouch() callback method is the key to obtaining information about the event. Information contained within the object includes the location of the touch within the view and the type of action performed. The MotionEvent object is also the key to handling multiple touches.
Understanding Touch Actions

An important aspect of touch event handling involves being able to identify the type of action performed by the user. The type of action associated with an event can be obtained by making a call to the getActionMasked() method of the MotionEvent object which was passed through to the onTouch() callback method. When the first touch on a view occurs, the MotionEvent object will contain an action type of ACTION_DOWN together with the coordinates of the touch. When that touch is lifted from the screen an ACTION_UP event is generated. Any motion of the touch between the ACTION_DOWN and ACTION_UP events will be represented by ACTION_MOVE events.

When more than one touch is performed simultaneously on a view, the touches are referred to as pointers. In a multi-touch scenario, pointers begin and end with event actions of type ACTION_POINTER_UP and ACTION_POINTER_DOWN respectively. In order to identify the index of the pointer that triggered the event, the getActionIndex() callback method of the MotionEvent object must be called.
Handling Multiple Touches

The previous chapter began exploring event handling within the narrow context of a single touch event. The Kindle Fire, in common with most Android devices, possesses the ability to respond to multiple consecutive touches (though it is important to note that the current generation of Kindle Fire device can only detect two touches at any one time).

As previously discussed, each touch in a multi-touch situation is considered by the Android framework to be a pointer. Each pointer, in turn, is referenced by an index value and assigned an ID. The current number of pointers can be obtained via a call to the getPointerCount() method of the current MotionEvent object. The ID for a pointer at a particular index in the list of current pointers may be obtained via a call to the MotionEvent getPointerId() method. For example, the following code excerpt obtains a count of pointers and the ID of the pointer at index 0:

public boolean onTouch(View v, MotionEvent m) {
int pointerCount = m.getPointerCount();
int pointerId = m.getPointerId(0);
return true;
}

Note that the pointer count will always be greater than or equal to 1 when an onTouch() method is called (since at least one touch must have occurred for the callback to be triggered).

A touch on a view, particularly one involving motion across the screen, will generate a stream of events before the point of contact with the screen is lifted. As such, it is likely that an application will need to track individual touches over multiple touch events. Whilst the ID of a specific touch gesture will not change from one event to the next, it is important to keep in mind that the index value will change as other touch events come and go. When working with a touch gesture over multiple events, therefore, it is essential that the ID value be used as the touch reference in order to make sure the same touch is being tracked. When calling methods that require an index value, this should be obtained by converting the ID for a touch to the corresponding index value via a call to the findPointerIndex() method of the MotionEvent object.
An Example Multi-Touch Application

The example application created in the remainder of this chapter will track up to two touch gestures as they move across a layout view. As the events for each touch are triggered, the coordinates, index and ID for each touch will be displayed on the screen. Begin by launching the Eclipse environment and creating an Android project named MotionEvent with an appropriate package name using the Android 2.3.3, level 10 SDK and including a template activity.
Designing the Activity User Interface

The user interface for the application’s sole activity is to consist of a RelativeLayout view containing two TextView objects. Within the Project Explorer panel, navigate to MotionEvent -> res -> layout and double click on the main.xml layout resource file to load it into the Graphical Layout tool and either design the layout illustrated in Figure 16-1 (using a RelativeLayout as the root view) or switch to the XML editor by selecting the main.xml tab at the bottom of the layout panel and replace the current XML with the following:


android:id=”@+id/RelativeLayout1″
android:layout_width=”fill_parent”
android:layout_height=”fill_parent”
android:orientation=”vertical” >

android:id=”@+id/textView1″
android:layout_width=”wrap_content”
android:layout_height=”wrap_content”
android:layout_alignParentTop=”true”
android:layout_centerHorizontal=”true”
android:layout_marginTop=”365dp”
android:text=”Large Text”
android:textAppearance=”?android:attr/textAppearanceLarge” />

android:id=”@+id/textView2″
android:layout_width=”wrap_content”
android:layout_height=”wrap_content”
android:layout_alignLeft=”@+id/textView1″
android:layout_below=”@+id/textView1″
android:layout_marginTop=”45dp”
android:text=”Large Text”
android:textAppearance=”?android:attr/textAppearanceLarge” />

The UI of a touch event example Android application

Figure 16-1

Before moving on to write the code for the callback method, be sure to save the layout ‘main.xml file.
Implementing the Touch Event Listener

In order to receive touch event notifications it will be necessary to register a touch listener on the RelativeLayout1 view within the onCreate() method of the MotionEventActivity activity class. Within the Project Explorer panel, locate the MotionEventActivity.java file and double click on it to load it into the editor panel. Within the onCreate() method, add code to identify the RelativeLayout view object, register the touch listener and implement the onTouch() callback method which, in this case, is going to call a second method named handleTouch() to which is passed the MotionEvent object:

package com.ebookfrenzy.MotionEvent;

import android.app.Activity;
import android.os.Bundle;
import android.view.MotionEvent;
import android.view.View;
import android.widget.RelativeLayout;

public class MotionEventActivity extends Activity {
/** Called when the activity is first created. */
@Override
public void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setContentView(R.layout.main);

RelativeLayout myLayout =
(RelativeLayout)findViewById(R.id.RelativeLayout1);

myLayout.setOnTouchListener(
new RelativeLayout.OnTouchListener() {
public boolean onTouch(View v, MotionEvent m) {
handleTouch(m);
return true;
}
}
);

}
}

The final task before testing the application is to implement the handleTouch() method called by the onTouch() callback method. The code for this method reads as follows:

void handleTouch(MotionEvent m)
{
TextView textView1 = (TextView)findViewById(R.id.textView1);
TextView textView2 = (TextView)findViewById(R.id.textView2);

int pointerCount = m.getPointerCount();

for (int i = 0; i < pointerCount; i++)
{
int x = (int) m.getX(i);
int y = (int) m.getY(i);
int id = m.getPointerId(i);
int action = m.getActionMasked();
int actionIndex = m.getActionIndex();
String actionString;

switch (action)
{
case MotionEvent.ACTION_DOWN:
actionString = “DOWN”;
break;
case MotionEvent.ACTION_UP:
actionString = “UP”;
break;
case MotionEvent.ACTION_POINTER_DOWN:
actionString = “PNTR DOWN”;
break;
case MotionEvent.ACTION_POINTER_UP:
actionString = “PNTR UP”;
break;
case MotionEvent.ACTION_MOVE:
actionString = “MOVE”;
break;
default:
actionString = “”;
}

String touchStatus = “Action: ” + actionString + ” Index: ” + actionIndex + ” ID: ” + id + ” X: ” + x + ” Y: ” + y;

if (id == 0)
textView1.setText(touchStatus);
else
textView2.setText(touchStatus);
}

Before compiling and running the application it is worth taking the time to walk through this code step by step to highlight the tasks that are being performed.

The code begins by obtaining references to the two TextView objects in the user interface and identifying how many pointers are currently active on the view:

TextView textView1 = (TextView)findViewById(R.id.textView1);
TextView textView2 = (TextView)findViewById(R.id.textView2);

int pointerCount = m.getPointerCount();

Next, the pointerCount variable is used to initiate a for loop which performs a set of tasks for each active pointer. The first few lines of the loop obtain the X and Y coordinates of the touch together with the corresponding event ID, action type and action index. Lastly, a string variable is declared:

for (int i = 0; i < pointerCount; i++)
{
int x = (int) m.getX(i);
int y = (int) m.getY(i);
int id = m.getPointerId(i);
int action = m.getActionMasked();
int actionIndex = m.getActionIndex();
String actionString;

Since action types equate to integer values, a switch statement is used to convert the action type to a more meaningful string value which is stored in the previously declared actionString variable:

switch (action)
{
case MotionEvent.ACTION_DOWN:
actionString = “DOWN”;
break;
case MotionEvent.ACTION_UP:
actionString = “UP”;
break;
case MotionEvent.ACTION_POINTER_DOWN:
actionString = “PNTR DOWN”;
break;
case MotionEvent.ACTION_POINTER_UP:
actionString = “PNTR UP”;
break;
case MotionEvent.ACTION_MOVE:
actionString = “MOVE”;
break;
default:
actionString = “”;
}

Lastly, the string message is constructed using the actionString, the action index, touch ID and X and Y coordinates. The ID value is then used to decide whether the string should be displayed on the first or second TextView object:

String touchStatus = “Action: ” + actionString + ” Index: ”
+ actionIndex + ” ID: ” + id + ” X: ” + x + ” Y: ” + y;

if (id == 0)
textView1.setText(touchStatus);
else
textView2.setText(touchStatus);

Running the Example Application

Since the Android emulator environment does not support multi-touch, compile and run the application on a physical Kindle Device. Once launched, experiment with single and multiple touches on the screen and note that the text views update to reflect the events as illustrated in Figure 16-2:

The Kindle Fire Android Touch Event app running

Figure 16-2

Summary

Activities receive notifications of touch events by registering an onTouchListener event listener and implementing the onTouch() callback method which, in turn, is passed a MotionEvent object when called by the Android runtime. This object contains information about the touch such as the type of touch event, the coordinates of the touch and a count of the number of touches currently.

When multiple touches are involved, each point of contact is referred to as a pointer with each assigned an index and an ID. Whilst the index of a touch can change from one event to another, the ID will remain unchanged until the touch ends.

This chapter has worked through the creation of an example Android application designed to display the coordinates and action type of up to two simultaneous touches on a Kindle Fire device display.

VN:F [1.9.22_1171]
Rating: 0.0/10 (0 votes cast)
VN:F [1.9.22_1171]
Rating: 0 (from 0 votes)